Skip to content
(+351) 263 948 197 (call to a Portuguese landline) [email protected] Mon–Fri 8am–5pm
Request a quote
Industrial HVAC

Stable temperature
in unforgiving spaces

Industrial buildings, warehouses and technical spaces where temperature affects the product, the equipment or the people. We size on real thermal load, measured on site.

Request a quoteProjects
VRV and VRF systems
Variable refrigerant flow: each zone is regulated independently
Up to 60% savings
Inverter technology cuts consumption compared with fixed-speed (direct-on-line) systems
25 years
Warranty on panels
10 years
Warranty on inverters
22%
Minimum efficiency
60%
Max. climate control saving
The thermal load

Sizing by what
is measured, not estimated

Many of the industrial HVAC systems we come across are oversized. They cost more to buy, more to run, and cycle constantly, which shortens equipment life.

We measure the real load: occupancy, internal gains, building envelope and hours of use. The system is sized from those measured values.

Survey before quotation
Measured on site. The figure comes from what is there, not from a price list, and any later change is flagged before it happens.
Delivery with a named lead
Whoever surveys the project sees it through, and the name appears on the contract and the site board.
Documented handover
Measurement records, test reports and photographic records, which allow the work to be checked months later.
60 % possible saving
Industrial HVAC

What is guaranteed
in writing

VRV and VRF systems

Variable refrigerant flow: each zone is regulated independently.

Up to 60% savings

Inverter technology cuts consumption compared with fixed-speed (direct-on-line) systems.

25 years
warranty

Established brands

Daikin, Mitsubishi, LG and Samsung, with manufacturer warranty and support.

22%
minimum efficiency

Documented commissioning

Flow, temperature and pressure testing, delivered in writing.

Solutions

Systems for every
type of space

Solution 01

Production building and warehouse

Climate control of large volumes with ducted distribution and independent control zones.

See detail →
Solution 02

Technical space

Server rooms, laboratories and process areas where temperature tolerance is tight.

See detail →
Solution 03

Industrial office

VRV/VRF systems for the administrative areas within the plant.

See detail →
In detail

What sits
behind each one

01

Production building and warehouse

In a large volume the difficulty lies mainly in air distribution. Too much air in one place and too little in another costs money and solves nothing. The calculation starts from the thermal load measured on site, with the occupancy and the process that are actually there.

  • Thermal load measured in the space, with doors, loading bays and process running
  • Ducted distribution sized by zone, with independent control
  • Airflow balancing verified and recorded at handover
02

Technical space

Server rooms, laboratories and process areas run to tight tolerances: one degree of drift is already a failure. Here continuity of service weighs more than equipment cost, and that is what sets the level of redundancy.

  • Redundancy sized against the cost of downtime, not against a generic rule
  • Temperature and humidity control with continuous logging
  • Load test before handover
03

Industrial office

The administrative area inside the plant has different demands from the hall next to it: noise, comfort and zone-by-zone control. VRV and VRF systems allow each area to be handled independently without duplicating equipment.

  • Variable refrigerant flow, with each zone regulating independently
  • Daikin, Mitsubishi, LG and Samsung, chosen on parts availability and service support
  • Inverter technology, which lowers consumption compared with fixed-speed (direct-on-line) systems

From first contact
to documented handover

01
Thermal survey
Measurement of real load, occupancy and internal gains.
02
Design
System selection, duct routing and definition of control zones.
03
Installation
Units, ducting and pipework mounted, with insulation and supports.
04
Commissioning
Flow, temperature and pressure testing, with report delivered.
05
Training and maintenance
Instruction for operators and preventive maintenance plan.
The calculation is written down before the first team reaches the site
Delivered works

Installations that
demonstrate our capability

Plant room: air handling units and pipework
Warehouse roof, with plant installed at roof level
Façade works, using a mobile elevating work platform (MEWP)
Material logistics on site

Questions that deserve
a direct answer

What is the difference between VRV and VRF?

They are the same variable refrigerant flow technology. VRV is Daikin’s registered name; VRF is the generic term used by other manufacturers.

Can you install climate control in a building already in operation?

Yes. Installation is phased, with agreed shutdowns. The works plan is settled before starting.

Which brands do you install?

Daikin, Mitsubishi, LG and Samsung. The choice depends on load, control zones and the support available in the country.

Does the 60% saving always apply?

No. It is the maximum gain of inverter technology compared with fixed-speed (direct-on-line) systems, and depends on usage profile. The calculation is done per installation.

Request a quote

For projects that demand
a proper standard.

Tell us what you need. We reply with a written technical proposal.

Request a quote Talk to us